LD intelligent integrated balance

product description:

The integrated balance flowmeter combined with on-site customer feedback directly reads out the instantaneous flow rate and cumulative flowmeter and other values. It has fewer installation parts and fewer moving parts, which greatly reduces post-sales problems and installation costs.

Features:

◆ The meter head displays the instantaneous and cumulative flow;

◆ The measurement accuracy is 5-10 times that of the standard orifice plate;

◆ Flow noise is 1/15 of standard orifice plate;

◆ Permanent pressure loss is 1/3 of standard orifice plate;

◆ Pressure recovery is 2 times faster than standard orifice plate;

◆ The minimum straight pipe section can be less than 0.5D.

◆ Measuring pipe diameter: DN6--DN2000;

◆ Accuracy: ± 0.5% of measured value;

◆ Repeatability: ± 0.1%;

◆ β range: 0.40-0.85;

◆ Temperature: -50 ℃-+ 600 ℃;

◆ Range ratio: typical 15: 1 maximum 30: 1;

◆ Straight pipe section requirements: upstream 0-3D downstream 0-1D (D refers to pipe diameter);

◆ Good stability: the throttle area is stable for a long time and the signal is stable;

◆ No stagnation zone: Guaranteed by conical thorough purging design;

◆ Stable output differential pressure: The fluctuation of the negative pressure end of the tail of the V cone is small;

◆ Permanent pressure loss is small, only 1/3 ~ 1/2 of orifice plate is used;

◆ Pressure level (MPa): PN0.6, PN1.0, PN1.6, PN2.5, PN4.0, PN6.4, PN10, PN16, PN24.